1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

ASE GOLD Trigger Group / Not comming out ??? Help

Discussion in 'Shooting Related Threads' started by Gamba Man, Apr 30, 2012.

Thread Status:
Not open for further replies.
  1. Gamba Man

    Gamba Man Active Member

    Joined:
    Mar 6, 2008
    Messages:
    481
    Location:
    Ontario/Canada
    I've opened the top tang lever to the right, pushed the safety as far up as it will go (not much past fire position), and pull down on trigger group,...but....trigger group won't come out.

    What am I doing wrong ?

    Cesare
     
  2. releasebob

    releasebob Member

    Joined:
    Mar 27, 2009
    Messages:
    198
    Close the action,push the button ahead as far as it will go,put gentle pressure on the trigger and open the action,if you do this with the gun upside down it is easier as the barrel doesn't drop as your removing the trigger.BOB
     
  3. JACK

    JACK Well-Known Member Supporting Vendor

    Joined:
    Apr 28, 2006
    Messages:
    14,711
    Location:
    NW Wisconsin
    loosen the stock a turn or so.
     
  4. Cyrus

    Cyrus Member

    Joined:
    Aug 10, 2010
    Messages:
    377
    I have slightly opened the action 10-20%, then push safety foward and pull down on trigger at the same time. Sometimes it'a bitch but has worked for me. Good luck, Jeff
     
  5. Gamba Man

    Gamba Man Active Member

    Joined:
    Mar 6, 2008
    Messages:
    481
    Location:
    Ontario/Canada
    I'm assuming I can try all these steps with the barrels 'off' the gun ?

    Cesare
     
Thread Status:
Not open for further replies.