1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

ASE 90 Trigger Removal

Discussion in 'Shooting Related Threads' started by Landshark, May 22, 2010.

Thread Status:
Not open for further replies.
  1. Landshark

    Landshark Member

    Joined:
    Jan 18, 2008
    Messages:
    445
    What is the procedure to remove and re-install the ASE 90 trigger? Thanks in advance!
     
  2. pheasantsgalore

    pheasantsgalore Active Member

    Joined:
    Mar 10, 2007
    Messages:
    1,181
    Location:
    Kansas City area
    Same as Perazzi. With unloaded gun, close barrels, push safety all the way forward, at same time gently pull trigger group down and away from receiver. Thats the way I remember.......Rob
     
  3. Landshark

    Landshark Member

    Joined:
    Jan 18, 2008
    Messages:
    445
    Thanks!
     
  4. esetter

    esetter Active Member

    Joined:
    Dec 14, 2007
    Messages:
    1,440
    That is correct. To install, put the front in first and snap the back in. Very simple. Be careful not to let anyone shoot the gun without telling them not to push the safety forward. I did and the guy pushed the safety forward and the trigger dropped out on the concrete. My fault, I should have told him.
     
Thread Status:
Not open for further replies.