1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

anyone using duster wads ?

Discussion in 'Uncategorized Threads' started by labman1, Jun 24, 2008.

Thread Status:
Not open for further replies.
  1. labman1

    labman1 TS Member

    Joined:
    Jun 18, 2008
    Messages:
    36
    rtrying to find results from duster wads
     
  2. deercreek

    deercreek Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,131
    Location:
    Indiana
    Used Claybusters until I stumbled onto Duster. I am thankful to Claybuster for what they have done for the pricing in general. Now I use only Duster unless I need a straight wall type wad, and then I go to Claybuster's. All of my plastic fouling problem in the choke area stopped when I began with Duster's. They are very slick and go through the loader well.
     
  3. dverna

    dverna Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,717
    I have also converted to Dusters from Claybusters. I like the Downrange wad too.

    Don (who loads mostly one ounce loads)
     
  4. BDodd

    BDodd TS Member

    Joined:
    Jan 29, 1998
    Messages:
    3,594
    Used to use them, had no issues with them....Bob Dodd
     
  5. mike Adcock

    mike Adcock Member

    Joined:
    Jan 29, 1998
    Messages:
    182
    I have used them too. No problems here either.

    Mike
     
  6. wm rike

    wm rike Member

    Joined:
    Jul 19, 2007
    Messages:
    593
    If there is a pecking order, my experience has been that the factory wads are easily at the top, followed closely by Duster & Downrange. Claybusters are guaranteed to leave lead and plastic in any gun I own.
     
  7. Trap2

    Trap2 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,685
    Location:
    Redding, California
    I used Duster wads for several years and had absolutely no problems with them. I have, however, switched to the original Windjammer wad because they pattern as well, or better than the Dusters did, cost much less to purchase, load very easily, and leave no plastic residue in my barrel. I believe that, for the money, the original Windjammer wad is the best bargain available on any reloading component on the market..... Just my experience...Dan Thome (Trap2)
     
  8. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    Dan, where are you buying the orig ones
     
  9. Trap2

    Trap2 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,685
    Location:
    Redding, California
    Cubancigar....Check your PM......Dan
     
Thread Status:
Not open for further replies.