1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Anyone Replace Beretta Memory Adj. Hardware

Discussion in 'Shooting Related Threads' started by leadvail, Oct 10, 2011.

Thread Status:
Not open for further replies.
  1. leadvail

    leadvail Member

    Joined:
    Apr 3, 2007
    Messages:
    695
    Location:
    Colorado
    My plastic memory adjustable stock hardware needs replaced. I know I can't be the only one. Does the replacement graco fit and work ok? Maybe the add a rib/ stock positioning model?

    Thanks, Bob
     
  2. 682LINY

    682LINY Member

    Joined:
    Aug 14, 2006
    Messages:
    967
    Joel etchlin (sic) guns in pa has hardware. I though factory stuff was carbon fiber
     
  3. Ruck

    Ruck Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,067
    The Graco replacement hardware will solve your problem. I use it regularly.

    Ken Rucker
     
  4. BIGDON

    BIGDON Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    6,656
    Location:
    Michigan
    Have Tron replace the plastic Beretta junk with some good hardware. He has done it to one of my guns and for many others.

    Don
     
  5. Ontario Chris

    Ontario Chris Member

    Joined:
    Feb 23, 2006
    Messages:
    441
    Location:
    NY Finger Lakes
    I purchased the replacement hardware from Joel Etchen. He also has extra long posts. About $100, the install takes about 5 minutes, and works great.

    Chris
     
  6. leadvail

    leadvail Member

    Joined:
    Apr 3, 2007
    Messages:
    695
    Location:
    Colorado
    I am sorry, but I am not going to justify it by carbon fiber, its PLASTIC CRAP!

    Don't mean to offend the gun or anyone, I love it, but that was an issue. I just want to correct it. Bob
     
  7. skeet_man

    skeet_man Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,670
    Location:
    Rochester, NY
    I can't possibly fathom why Beretta and Browning can't come up with a solid, sturdy adjustable comb. Pretty much ALL the hardware that both of them have ever used for adjustable combs is either flimsy junk, or overcomplicated to the point of usability. You could pick just about ANY aftermarket hardware or gunsmith, and the quality of the work and materials would be better than what they use.
     
  8. HSLDS

    HSLDS Well-Known Member

    Joined:
    Nov 2, 2006
    Messages:
    6,646
    Location:
    S-E PA
    Joel Ethin's makes a 'drop in' unit.

    It's $90 plus P & H
     
Thread Status:
Not open for further replies.