1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Any Ford Mechanics Onboard?

Discussion in 'Off Topic Threads' started by rrrocketman, Jun 21, 2009.

Thread Status:
Not open for further replies.
  1. rrrocketman

    rrrocketman Member

    Joined:
    Jul 30, 2008
    Messages:
    210
    Location:
    Cody, WY
    Need some advice about Shelby GT500 mods.

    Thanks!
     
  2. Texshooter

    Texshooter Member

    Joined:
    Jan 29, 1998
    Messages:
    710
    The Supercharger Pulley for an extra 125 horses looks interesting. I've been studying them for a Jaguar XKR (same motor). Kenne Bell offers this upgrade for GT500 owners. Replacing the factory snout with the High Capacity Drive (HCD) assembly equipped with a 2.75-inch blower pulley resulted in a jump in power up to 715 hp. The torque production was up as well, from 545 lb-ft to 638 lb-ft with the stock 2.3L twin-screw supercharger. Going to the 2.8L Kenne Bell blower produced a massive 22 psi, with the peak numbers now up to 825 hp and 695 lb-ft. Beats the heck out of my old Ford 427. AJ
     
  3. rrrocketman

    rrrocketman Member

    Joined:
    Jul 30, 2008
    Messages:
    210
    Location:
    Cody, WY
    Thanks AJ --- sending you a PM.

    Rich
     
Thread Status:
Not open for further replies.