1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Any Experience Using IMR SR7625 Powder Ioz & 1/18

Discussion in 'Shooting Related Threads' started by Cheetah, Aug 25, 2009.

Thread Status:
Not open for further replies.
  1. Cheetah

    Cheetah Member

    Joined:
    Jun 8, 2008
    Messages:
    86
    Any one had any experience loading SR 7625 powder for 1oz. and 1/18 oz loads using Remington Nitro's or AA's ???
    Any input would be very usefull
    Best regards,

    Harold Steen
     
  2. halfmile

    halfmile Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    15,649
    Location:
    Green Bay Wisconsin
    You can make an ounce an an eighth load go very fast with it.

    Too dirty for normal loads.

    HM
     
  3. goatskin

    goatskin TS Member

    Joined:
    Jun 24, 2009
    Messages:
    1,781
    I have loaded quite a bit of SR7625 in a variety of loads and speeds in 2" 2½" & 2¾" hulls, but, unfortunately, none of them are Rem hulls.

    It is a pretty special powder, but unless you made a major $core on lot$ of it, if you are loading for 11-1150-1200-1250, there are probably better powders for trap.

    If you want some parking-lot loads, it sparkles.


    Bob
     
  4. IMR 7625

    IMR 7625 Member

    Joined:
    Mar 14, 2008
    Messages:
    184
    I HAVE USED IT FOR OVER 40 YEARS 23.8 TO 24 GR.
     
  5. GoldEx

    GoldEx Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,228
    Location:
    Howell, MI
    Probably one of the most versatile powders for shotguns out there. Availability can be spotty sometimes. Works in all but the 410. Lots of data for all velocity ranges. Pricey, bulky, dirty but very soft shooting.

    JK
     
  6. TomB

    TomB Member

    Joined:
    Jan 29, 1998
    Messages:
    109
    Have used it for years with Win 114 wad and Fed 209A primer..22.5 gr and 1 1/8 shot in a silver AA case. I chrono at 1235 from a 90T bored to .746. It's absolutely crushing from 27 & +. Tom B
     
Thread Status:
Not open for further replies.