1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Adding notches to MX2000

Discussion in 'Shooting Related Threads' started by rob111, Mar 23, 2010.

Thread Status:
Not open for further replies.
  1. rob111

    rob111 Member

    Joined:
    Sep 23, 2009
    Messages:
    180
    How to add notches to mx2000 rib. is this something a machine shop can do ?Or do I have to have a gunsmith do. if so who.. as always, Respectfully, Rob Mize
     
  2. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,732
    Randy Ross had 2 notches added to his, but I can't recall who he had do the work. I believe he said it would shoot 275% high. Bill Malcolm
     
  3. TOOLMAKER 251

    TOOLMAKER 251 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,398
    Bill, 275% equals 41.25 inches high, I think you would need room on the post's for about 15 notches to shoot that high.
     
  4. T2

    T2 Member

    Joined:
    Dec 16, 2007
    Messages:
    102
    Rob, I talked to Tom Wilkinson about adding notches to a MX10RS. He told me $150.00 each notch. He also told me you can only add one notch to the overunders but two or three to the unsingle. Hope that helps.

    T2
     
  5. Dr.Longshot

    Dr.Longshot Banned Banned

    Joined:
    Jan 29, 1998
    Messages:
    5,722
    Try this, you can invert the plunger and gain Higher POI but the point does not go all the way in, be sure to invert both of them to hgain max advantage.

    They will not move, I have done this, & I have milled the front of both rib and Bbl and added 2 notches front and rear.


    Gary Bryant
    Dr.longshot
     
  6. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,732
    Toolmaker, Randy told me that he had 2 notches added to the 3 that were already there and that the gun shot 275% high. Perhaps the stock was raised as well, I don't know if that is the case or not. He is too big for me to tell him that he is a fibber ;). Bill Malcolm
     
  7. rob111

    rob111 Member

    Joined:
    Sep 23, 2009
    Messages:
    180
    Thanks for the info.. Respectfully, Rob Mize
     
Thread Status:
Not open for further replies.