1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Add on Ribs

Discussion in 'Shooting Related Threads' started by BuddyTrapChamp, May 31, 2013.

Thread Status:
Not open for further replies.
  1. BuddyTrapChamp

    BuddyTrapChamp Member

    Joined:
    Dec 30, 2010
    Messages:
    255
    I have an MX8 and interested in adding an Adjustable rib for it. what is out there and what do people recommend
     
  2. Bob Schultz

    Bob Schultz Well-Known Member Supporting Vendor

    Joined:
    Jan 29, 1998
    Messages:
    2,749
    Location:
    Tuxedo NC
    You might consider looking for a MX10 or RS barrel set and sell your MX 8 set. Removal of the fixed rib and re-soldering the new rib supports to the old barrel can be very risky. Destabilizing the metal and middle rib solder is a possibility. If you are not trying to change the POI then an add on delrin or aluminum rib will work fine. There are a couple of folks who can put an add on rib to raise your POI...Dennis DeVault does some fine work.

    Bob Schultz
     
Thread Status:
Not open for further replies.