1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Add A Rib

Discussion in 'Shooting Related Threads' started by GradeIII, Jun 28, 2011.

Thread Status:
Not open for further replies.
  1. GradeIII

    GradeIII TS Member

    Joined:
    Jan 13, 2009
    Messages:
    16
    Just took delivery of an Add A Rib for my Guerini Summit Limited and installed it last night. Very nicely finished rib and simple to install, drilled and tapped for the front bead. I chose not to install a mid-bead because I can't see it anyway - even if I wanted to.

    The installation went very well and I am looking forward to shooting the gun tomorrow to see if my cut comb needs further adjustment. I brought the comb up as high as it will go without longer posts, and when eyeballing it, it appears to be just about right. The patterning board will dictate whether to adjust it further.

    I will post pictures in a day or two and report back after the initial test firing.

    Doing business with Ray Braun and Add A Rib was easy and for around $175 delivered, I think the rib was an outstanding value.

    GradeIII
     
  2. GradeIII

    GradeIII TS Member

    Joined:
    Jan 13, 2009
    Messages:
    16
    Finally was able to take a picture of the Guerini with the Add A Rib installed. Love the look and feel of the rib. This product is great and a good bargain to boot.

    Dana Farrell
     
  3. dave-320c

    dave-320c Well-Known Member

    Joined:
    Jul 26, 2007
    Messages:
    1,325
    I ordered one today from Add A Rib for my MX3 Special.

    I thought I would see if a "heads up" stance would improve my scores.

    I will use a PFS with the Ultimate Comb to make it work (I hope).

    Let us know how you do.

    Regards, and good shooting,

    Dave
     
  4. dave-320c

    dave-320c Well-Known Member

    Joined:
    Jul 26, 2007
    Messages:
    1,325
    I ordered one today from Add A Rib for my MX3 Special.

    I thought I would see if a "heads up" stance would improve my scores.

    I will use a PFS with the Ultimate Comb to make it work (I hope).

    Let us know how you do.

    Regards, and good shooting,

    Dave
     
  5. dave-320c

    dave-320c Well-Known Member

    Joined:
    Jul 26, 2007
    Messages:
    1,325
    I ordered one today from Add A Rib for my MX3 Special.

    I thought I would see if a "heads up" stance would improve my scores.

    I will use a PFS with the Ultimate Comb to make it work (I hope).

    Let us know how you do.

    Regards, and good shooting,

    Dave
     
  6. GradeIII

    GradeIII TS Member

    Joined:
    Jan 13, 2009
    Messages:
    16
    I took it out today and shot a round of skeet -- (I'm a sporting clays shooter) -- and it seemed to be shooting to point of aim. I haven't had a chance to check the point of impact on a patterning board since I raised my comb the last time. It needed to be raised higher than my adjustable comb posts would initially allow, so I rigged up some temporary extra long hardware. I will be checking it on a board soon. It's just a simple matter of getting it properly aligned.

    All in all, I'm really pleased with the product. I would recommend it to anyone wanting a higher rib without spending a fortune.

    Dana Farrell
     
Similar Threads
  1. Surfside6
    Replies:
    4
    Views:
    1,423
  2. topdog
    Replies:
    1
    Views:
    1,223
  3. jake boy
    Replies:
    9
    Views:
    2,226
  4. tracyhunter
    Replies:
    14
    Views:
    1,843
  5. SHOOTER954
    Replies:
    20
    Views:
    1,857
Loading...
Thread Status:
Not open for further replies.