1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

90-T Stock bolt size?

Discussion in 'Shooting Related Threads' started by dale58, Nov 14, 2011.

Thread Status:
Not open for further replies.
  1. dale58

    dale58 G/U Browning BT-99 80/20 TS Supporters

    Joined:
    Mar 22, 2011
    Messages:
    1,144
    Location:
    North Shore, Ma.
    Does anyone know what size allen wrench to use on a 90-T stock bolt? thanks, Dale
     
  2. Recoil Sissy

    Recoil Sissy Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,837
    It's a 3/16".
     
  3. spitter

    spitter Well-Known Member TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    4,402
    Location:
    Prairie State
    I bought the 3/8" Bondhus long handled ball-hex "screwdriver" for the stock and the 3/16" for the drop-out trigger group...

    Jay
     
  4. dale58

    dale58 G/U Browning BT-99 80/20 TS Supporters

    Joined:
    Mar 22, 2011
    Messages:
    1,144
    Location:
    North Shore, Ma.
    So is it 3/8 or 3/16? I'm confused. Thanks, Dale
     
  5. spitter

    spitter Well-Known Member TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    4,402
    Location:
    Prairie State
    There are TWO required tools... 3/8" hex for your stock and 3/16" for the hex screw holding in the drop out trigger group...

    I was just offering an option in tools that are similar to the original equipment supplied by Remington/Kolar...

    Jay
     
  6. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,940
    The hex bolt in the stock is a3/16" wrench.

    The smaller wrench for the trigger housing and adjustable stocks is 3/32".

    The wrench size for the forend shoe, pivot screw of the adjustable rib, and the rear trigger guard screw is 5/64"

    The size for the out-of-battery screw in the trigger housing is 1/16"

    The smallest wrench needed is .050". This is needed for all of the small 4-40 set screws.

    Doug
     
  7. spitter

    spitter Well-Known Member TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    4,402
    Location:
    Prairie State
    Doug... my apologies... I got my numbers mixed up. Dale... sorry!

    But, I did buy the Bondhus yellow handled tools...

    Jay
     
  8. dale58

    dale58 G/U Browning BT-99 80/20 TS Supporters

    Joined:
    Mar 22, 2011
    Messages:
    1,144
    Location:
    North Shore, Ma.
    Thanks GunDr, Now we have all the sizes !!! Dale
     
  9. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,940
    Need to mention this...On those stock wrenches that have the ball on the end...grind it off!!! You'll curse yourself forever when it breaks off in the bolt.

    Doug
     
Thread Status:
Not open for further replies.