1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

800x load

Discussion in 'Shooting Related Threads' started by brownie20, Dec 25, 2008.

Thread Status:
Not open for further replies.
  1. brownie20

    brownie20 TS Member

    Joined:
    Mar 11, 2008
    Messages:
    50
    looking for a good 800x load for 2nd shot in a buddy shoot
     
  2. Kfart

    Kfart TS Member

    Joined:
    Mar 12, 2006
    Messages:
    12
    Use 22.2 Gr 800X 209 Win Primer 1 1/8 oz shot. Real soft shooting load. With Rem. STS type hulls. Clocks out at 1274 ave. in my Kreighoff. Bob Maasberg Farson Wyo
     
  3. ivanhoe

    ivanhoe Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,539
    Location:
    Oxford MA
    kfart

    "Use 22.2 Gr 800X 209 Win Primer 1 1/8 oz shot. Real soft shooting load. With Rem. STS type hulls. Clocks out at 1274 ave. in my Kreighoff. Bob Maasberg Farson Wyo"

    Can you tell us the PSI on that load? IMR/Hodgdon doesn't list any loads in 12 GA on the on line Data site.

    Bob Lawless
     
  4. oleolliedawg

    oleolliedawg Banned User Banned TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    10,124
    Location:
    Northampton PA
    22.5 grs. of 800-X and an AA wad with Winchester primers yields 9,600 PSI. Source is 2008 Hogdon manual-page 51!!
     
  5. djpk69

    djpk69 TS Member

    Joined:
    Jan 29, 1998
    Messages:
    725
    Aren't you "buddies" allowed to shoot 1 !/4 oz? .......if so,.........go from there. When in doubt......use LONGSHOT 1 1/4 loads. 800X is a great powder but Longshot is my "prefered" powder for buddy shoots. 28.5 grains W/ 6's .
     
  6. locdoc

    locdoc Member

    Joined:
    Jan 29, 1998
    Messages:
    874
    Location:
    Antrim, NH
    It probably won't format very well but here is the info for STS hulls....1 1/8 oz. Lower pressures than 7625

    Doug Whiton,P/W dealer/dist




    Hodgdon Powder Company
    Shotshell Load Recipe Report - 12/28/2008
    data.hodgdon.com 2 3/4"REMINGTON STS, NITRO 27,OR GUN CLUB PLASTIC SHELLS (IMR)
    Load Type: Lead Shot Gauge: 12
    Powder: 800-X Shell Wt.: 1.125

    2 3/4"REMINGTON STS, NITRO 27,OR GUN CLUB PLASTIC SHELLS (IMR) Gauge: 12
    Load Type: Lead Shot
    Shot Weight Powder Primer Wad Powder Wt. (Gr.) Pressure Vel. (ft/s)
    1 1/8 oz. 800-X CCI 209 CB 1118-12 19.5 6,200 PSI 1100
    1 1/8 oz. 800-X CCI 209 CB 1118-12 21 7,000 PSI 1150
    1 1/8 oz. 800-X CCI 209 CB 1118-12 22 7,500 PSI 1200
    1 1/8 oz. 800-X CCI 209 CB 1118-12 23.5 8,400 PSI 1250
    1 1/8 oz. 800-X CCI 209 Fed. 12S3 19.5 7,000 PSI 1100
    1 1/8 oz. 800-X CCI 209 Fed. 12S3 20.5 7,600 PSI 1150
    1 1/8 oz. 800-X CCI 209 Fed. 12S3 22 8,500 PSI 1200
    1 1/8 oz. 800-X CCI 209 Fed. 12S3 23.5 9,400 PSI 1250
    1 1/8 oz. 800-X CCI 209 Rem. FIG. 8 19.5 6,500 PSI 1100
    1 1/8 oz. 800-X CCI 209 Rem. FIG. 8 21 7,200 PSI 1150
    1 1/8 oz. 800-X CCI 209 Rem. FIG. 8 22 7,600 PSI 1200
    1 1/8 oz. 800-X CCI 209 Rem. FIG. 8 24 8,700 PSI 1250
    1 1/8 oz. 800-X CCI 209 WAA12 19.5 6,900 PSI 1100
    1 1/8 oz. 800-X CCI 209 WAA12 20.5 7,500 PSI 1150
    1 1/8 oz. 800-X CCI 209 WAA12 21.5 8,200 PSI 1200
    1 1/8 oz. 800-X CCI 209 WAA12 23 9,100 PSI 1250
    1 1/8 oz. 800-X CCI 209 Windjammer 20 6,000 PSI 1100
    1 1/8 oz. 800-X CCI 209 Windjammer 21 6,700 PSI 1150
    1 1/8 oz. 800-X CCI 209 Windjammer 22 7,300 PSI 1200
    1 1/8 oz. 800-X CCI 209 Windjammer 23.5 8,200 PSI 1250
    1 1/8 oz. 800-X Fed. 209A CB 1118-12 19.5 6,800 PSI 1100
    1 1/8 oz. 800-X Fed. 209A CB 1118-12 20.5 7,500 PSI 1150
    1 1/8 oz. 800-X Fed. 209A CB 1118-12 21.5 8,200 PSI 1200
    1 1/8 oz. 800-X Fed. 209A CB 1118-12 23 9,000 PSI 1250
    1 1/8 oz. 800-X Fed. 209A Fed. 12S3 19 7,300 PSI 1100
    1 1/8 oz. 800-X Fed. 209A Fed. 12S3 20 8,000 PSI 1150
    1 1/8 oz. 800-X Fed. 209A Fed. 12S3 21.5 9,000 PSI 1200
    1 1/8 oz. 800-X Fed. 209A Fed. 12S3 23 9,900 PSI 1250
    1 1/8 oz. 800-X Fed. 209A Rem. FIG. 8 19.5 6,900 PSI 1100
    1 1/8 oz. 800-X Fed. 209A Rem. FIG. 8 20.5 7,500 PSI 1150
    1 1/8 oz. 800-X Fed. 209A Rem. FIG. 8 22 8,400 PSI 1200
    1 1/8 oz. 800-X Fed. 209A Rem. FIG. 8 23.5 9,200 PSI 1250
    1 1/8 oz. 800-X Fed. 209A WAA12 19 7.200 PSI 1100
    1 1/8 oz. 800-X Fed. 209A WAA12 20 8,000 PSI 1150
    1 1/8 oz. 800-X Fed. 209A WAA12 21 8,700 PSI 1200
    1 1/8 oz. 800-X Fed. 209A WAA12 22.5 9,700 PSI 1250
    1 1/8 oz. 800-X Fed. 209A Windjammer 20 6,500 PSI 1100
    1 1/8 oz. 800-X Fed. 209A Windjammer 21 7,200 PSI 1150
    1 1/8 oz. 800-X Fed. 209A Windjammer 22 7,900 PSI 1200
    1 1/8 oz. 800-X Fed. 209A Windjammer 23 8,600 PSI 1250
    1 1/8 oz. 800-X Win. 209 CB 1118-12 19.5 6,500 PSI 1100
    1 1/8 oz. 800-X Win. 209 CB 1118-12 20.5 7,200 PSI 1150
    1 1/8 oz. 800-X Win. 209 CB 1118-12 21.5 7,800 PSI 1200
    1 1/8 oz. 800-X Win. 209 CB 1118-12 23 8,700 PSI 1250
    1 1/8 oz. 800-X Win. 209 Fed. 12S3 19 6,800 PSI 1100
    1 1/8 oz. 800-X Win. 209 Fed. 12S3 20 7,500 PSI 1150
    1 1/8 oz. 800-X Win. 209 Fed. 12S3 21.5 8,500 PSI 1200
    1 1/8 oz. 800-X Win. 209 Fed. 12S3 23 9,600 PSI 1250
    1 1/8 oz. 800-X Win. 209 Rem. FIG. 8 19.5 6,500 PSI 1100
    1 1/8 oz. 800-X Win. 209 Rem. FIG. 8 20.5 7,200 PSI 1150
    1 1/8 oz. 800-X Win. 209 Rem. FIG. 8 22 8,100 PSI 1200
    1 1/8 oz. 800-X Win. 209 Rem. FIG. 8 23.5 8,900 PSI 1250
    1 1/8 oz. 800-X Win. 209 WAA12 19 6,900 PSI 1100
    1 1/8 oz. 800-X Win. 209 WAA12 20 7,800 PSI 1150
    1 1/8 oz. 800-X Win. 209 WAA12 21 8,600 PSI 1200
    1 1/8 oz. 800-X Win. 209 WAA12 22.5 9,600 PSI 1250
    1 1/8 oz. 800-X Win. 209 Windjammer 20 6,200 PSI 1100
    1 1/8 oz. 800-X Win. 209 Windjammer 21 6,900 PSI 1150
    1 1/8 oz. 800-X Win. 209 Windjammer 22 7,500 PSI 1200
    1 1/8 oz. 800-X Win. 209 Windjammer 23.5 8,400 PSI 1250

    NEVER EXCEED MAXIMUM LOADS
     
Thread Status:
Not open for further replies.
Search tags for this page

800x remington sts win 209