1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

682 Trigger Removal??

Discussion in 'Uncategorized Threads' started by esoxhunter, Jun 25, 2007.

Thread Status:
Not open for further replies.
  1. esoxhunter

    esoxhunter Well-Known Member

    Joined:
    Mar 15, 2006
    Messages:
    2,061
    Location:
    Wisconsin
    I was wondering if anyone can tell me how to remove the trigger assembly on my Beretta 682 O/U ? I would like to be able to remove it once in awhile, so I can give it a proper cleaning. I'm sure by looking at that screw that I will need to purchase a screwdriver set from Brownell's. Any advice would be appreciated. Thanks. Ed
     
  2. halfmile

    halfmile Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    15,643
    Location:
    Green Bay Wisconsin
    Pat is right. You can see everything in there, bathe it in gun scrubber if you like, (I don't reccomend that) and apply your lube/protectant. No need to remove.

    If you insist, you have to remove the safety(held from the underside with a pin) to access the screw that holds the block in. From there it's normal removal.

    I hae had one of mine for 15 years, had the stock off several times, and never removed the trigger.

    Good luck.

    HM
     
Thread Status:
Not open for further replies.