1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

682 release back to pull

Discussion in 'Shooting Related Threads' started by leftex, Sep 2, 2013.

  1. leftex

    leftex Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,173
    Location:
    South of Dallas
    How involved is it to change Beretta 682 triggers from release back to pull? Thanks,
    Wayne
     
  2. gr8shot

    gr8shot Member

    Joined:
    Jan 29, 1998
    Messages:
    342
    Location:
    the great state of WV
    who made the release hooks?
     
  3. Dickgshot

    Dickgshot Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,676
    It cost $500 to convert them to release. Why don't you sell it and make some money to put into a more expensive gun. A release shooter will thank you.
     
  4. KENENT1

    KENENT1 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,393
    Location:
    Beloit, WI
    you can take the stock off, then there are release hooks attached to the receiver, usually on a pin with an e-clip on the end, remove the e-clip take the hook off and reinstall the e-clip, reinstall the stock...if it is a double release take both hooks off, one on each side..

    they can be reinstalled by putting the hooks back on...


    tony
     
  5. gr8shot

    gr8shot Member

    Joined:
    Jan 29, 1998
    Messages:
    342
    Location:
    the great state of WV
    ditto what ken said.

    spears release hooks are held on the receiver with a screw. its a two minute job. keep the hooks for future sale or problem fixer.

    i will be glad to charge 500$ and do it for you. (insert smiley face)

    steve.
     
  6. joe90t

    joe90t Active Member

    Joined:
    Dec 5, 2009
    Messages:
    1,828
    PLEASE be aware that NOT ALL Beretta Release triggers are made with HOOKS. Some are made with the release in the "center" of the trigger mechanism. Joe joe90t