1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

680 Series Strip Down

Discussion in 'Shooting Related Threads' started by UPTOIT, Dec 25, 2009.

Thread Status:
Not open for further replies.
  1. UPTOIT

    UPTOIT TS Member

    Joined:
    Dec 7, 2009
    Messages:
    13
    I have a 680 receiver that I am looking to completly strip down.
    Can anyone tell me how difficult this is?
    Are there any books or documents that give step by step instructions?
     
  2. HSLDS

    HSLDS Well-Known Member

    Joined:
    Nov 2, 2006
    Messages:
    6,398
    Location:
    S-E PA
    Are you talking about removing ALL internal parts??

    If so you will need specialized screw drives - European arms makers use really fine screw drivers. These are not typically available in the US. You can grind drivers to fit, or Brownells has a set of them as driver bits (http://www.brownells.com/.aspx/pid=425/Product/MAGNA_TIP_reg__THIN_BIT_SET).

    There are several pins (these are really fine too), etc. which need to be removed in a specific order - if done correctly the dis-assembly is a piece of cake. If not - well...

    Sorry, I couldn't tell you the correct process, but I know it has several twists and turns...

    Good Luck,

    David D
     
  3. KENENT1

    KENENT1 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,393
    Location:
    Beloit, WI
    taking apart is the easy part..........reassembling is where I have most of my problems.




    tony
     
Thread Status:
Not open for further replies.