1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

410 Jag Diameter?

Discussion in 'Shooting Related Threads' started by PatMiles, Nov 18, 2011.

Thread Status:
Not open for further replies.
  1. PatMiles

    PatMiles Well-Known Member

    Joined:
    Sep 26, 2011
    Messages:
    3,454
    I've been looking for a cleaning jag for my 410 tubes and there is not one to be had here in Albuquerque. So being the resourceful kinda guy that I am, I bought a 20 gauge jag at the local Sportsman's Warehouse to chuck up in the lathe I have in the shop and turn it down for my 410. Now I am hoping one of you folks can provide me with the correct diameter. Anybody?

    Thanks,

    Pat
     
  2. Dougbbbb

    Dougbbbb Well-Known Member

    Joined:
    Jun 16, 2010
    Messages:
    1,057
    Location:
    NJ
    0.41 inch or 10.4 mm

    Doug
     
  3. scooterbum

    scooterbum Active Member

    Joined:
    Apr 3, 2009
    Messages:
    1,193
    Keep turning it down until it suits you best.
     
  4. RunGunIPSC

    RunGunIPSC TS Member

    Joined:
    Nov 3, 2007
    Messages:
    886
    Depends on your choke. I have a Perazzi .410 that is full & full. These chokes will not allow .410 stuff to fit. Too tight.
     
  5. Brian in Oregon

    Brian in Oregon Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    25,284
    Location:
    Deplorable Bitter Clinger in Liberal La La Land
    Try .40 caliber pistol jags, and if that doesn't work, 35 cal rifle (.358) or .38 handgun (.357) and double up the patches.
     
  6. PatMiles

    PatMiles Well-Known Member

    Joined:
    Sep 26, 2011
    Messages:
    3,454
    Thanks for the info gents.

    Pat
     
  7. Bob_K

    Bob_K Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,501
    Location:
    Afton, Virginia
    Try a BoreTech jag.
     
Thread Status:
Not open for further replies.