1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

391 Experts

Discussion in 'Shooting Related Threads' started by FLAKETM, Apr 26, 2011.

Thread Status:
Not open for further replies.
  1. FLAKETM

    FLAKETM TS Member

    Joined:
    Jan 29, 1998
    Messages:
    458
    Is attaching an easy close device like the AnglePort a job for a gunsmith or can any klutz like me do it?
     
  2. TD1958

    TD1958 Member

    Joined:
    Oct 22, 2006
    Messages:
    596
    I installed one from Dennis Devault and it came with all the tools required and instructions. It was very easy to do. Tim
     
  3. quartering

    quartering Active Member

    Joined:
    Mar 15, 2007
    Messages:
    1,440
    it's easy to do plus you'll love the way it works. good luck with it
     
  4. 391 shooter

    391 shooter Well-Known Member

    Joined:
    Jun 3, 2008
    Messages:
    2,094
    Angle Port has a great short video of how to.
     
  5. Wass

    Wass Member

    Joined:
    Jan 29, 1998
    Messages:
    166
    Location:
    Colorado
    I purchased the angle port and took it to a gun smith. I have zero experience taking apart guns and wanted it done right. It cost me $40 at Gander Mountain to get it done. A bit pricey, but all the parts are put back where they should be (which would have been suspect if I had done it!).

    Mike
     
  6. BAD 303

    BAD 303 Active Member

    Joined:
    Apr 13, 2006
    Messages:
    3,550
    Takes about five minutes to do. All that is needed is a small punch and a paper clip. Only need to remove two pins and then replace the lever with the original button and re-install. Probably done close to a hundred of them. Very easy install. If you vcan take your 391 apart to clean it you can do this install.
     
  7. FLAKETM

    FLAKETM TS Member

    Joined:
    Jan 29, 1998
    Messages:
    458
    Thanks so much, everybody
     
  8. Coyote 270

    Coyote 270 Member

    Joined:
    Jun 26, 2009
    Messages:
    579
    What, you are supposed to take your 391 apart to clean it?
     
Thread Status:
Not open for further replies.
Search tags for this page

trap shooting expert