1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

390 GAS SPRINGS ?

Discussion in 'Shooting Related Threads' started by BAD 303, May 16, 2010.

Thread Status:
Not open for further replies.
  1. BAD 303

    BAD 303 Active Member

    Joined:
    Apr 13, 2006
    Messages:
    3,544
    Anyone out there using the Cole aftermarket springs on their 390 Beretta's? If so what color works best for handicap 1 1/8 oz type loads? Do they seem any more reliable than the original springs? Thanks
     
  2. Scoutman 06

    Scoutman 06 Member

    Joined:
    Aug 28, 2006
    Messages:
    318
    I have a 390 & a set of Cole aftermarket springs. You really have to experiment to find the right spring to match the ammo you're shooting. You try to find a balance where the gun cycles properly without slamming the bolt into the back of the receiver, which can break the "tits" off of the back of the bolt. Also, if you put alot of rounds thru the gun, the recoil spring will start to weaken & the gun will start to cycle harder/faster. As far as reliablilty, I have never broken a spring, Cole or Beretta. John
     
Thread Status:
Not open for further replies.