1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

3200 trigger problem

Discussion in 'Shooting Related Threads' started by ajhiii07, May 6, 2012.

Thread Status:
Not open for further replies.
  1. ajhiii07

    ajhiii07 Member

    Joined:
    Jul 24, 2011
    Messages:
    76
    is it possible for a 3200 trigger to go out of adjustment far enough that the trigger won't lift the sears off the hammers?
     
  2. krony2

    krony2 Member

    Joined:
    Oct 9, 2010
    Messages:
    92
    it is possible the trigger spring that is #90 on numrich schematic which pushes the selector block forward is broken, or the linkage itself for the selector block is gummed up enough that it is falling short of the sears.
     
  3. TOOLMAKER 251

    TOOLMAKER 251 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,398
    You have to remove the stock and see why this is happening.
     
  4. ajhiii07

    ajhiii07 Member

    Joined:
    Jul 24, 2011
    Messages:
    76
    it looks as tough you are right, as it won't move ahead far enough to engage the sears, thanks for your help ajhiii07
     
Thread Status:
Not open for further replies.