1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

1100 O-rings

Discussion in 'Shooting Related Threads' started by Capt.Ron/FL, Apr 21, 2013.

Thread Status:
Not open for further replies.
  1. Capt.Ron/FL

    Capt.Ron/FL Member

    Joined:
    Nov 22, 2012
    Messages:
    143
    A couple of weeks ago there was a thread about 1100 O-rings. Some posts included part #'s for NAPA, Grainger, and other outlets. Could I get that info posted again?? Used the search page but no luck..

    Many Thanks..

    Ron
     
  2. hmb

    hmb Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,441
    Just bring the old ring down to your local hardware store and you can match it up with a with a new o ring. HMB
     
  3. nglitz

    nglitz Active Member

    Joined:
    Oct 6, 2012
    Messages:
    249
    Location:
    Wondeful New Jersey
    It's a standard #21 O-ring. Enter that number on any O-ring supplier's website and buy a bag of them for a couple bucks. Inexpensive Buna-N material duplicates the Remington part. More expensive meterials won't necessarily work any better or last longer in your shotgun.

    Or, take a look on Ebay and get half a dozen for a few more bucks.

    Norm
     
  4. Big Jack

    Big Jack Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,735
    Location:
    Erie, Pa
    #21 "o" RING IS CORRECT..15/16" X 1 1/16" X 1/16" IS WHAT THEY MEASURE. The 15 cent rings from the local bearing supply work just fine and last just about as long as the expensive ones.

    Big Jack
     
  5. tburrey

    tburrey Member

    Joined:
    Jan 29, 1998
    Messages:
    130
    Ace hardware also has them for very low cost. Tom
     
  6. halfmile

    halfmile Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    15,649
    Location:
    Green Bay Wisconsin
    Viton is better. Bearing supply store, yes. I ordered a bag of 12, nice and inexpensive.

    HM
     
  7. notarget

    notarget TS Member

    Joined:
    Jan 29, 1998
    Messages:
    80
    Anyone know what size fits a 20 gage 1100?
     
  8. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,839
    Location:
    Royal Oak, Michigan
    I just bought 10 #21 "O" rings at Bearing Service Corp. Livonia, Michigan branch for $5.30 including tax.

    Chuck
     
  9. jalu

    jalu Member

    Joined:
    Jan 29, 1998
    Messages:
    52
    Oringsandmore.com has 25 Viton o-rings Size 021 for the Remington 1100 for $4.00. Item/Code number-021V.

    Ordered on 4-18 and arrived on 4-22, and that was from VA. to WA.

    Contact Mary Snellings at oringsandmore@verizon.net
    or...call (804) 437-5859
     
  10. Capt.Ron/FL

    Capt.Ron/FL Member

    Joined:
    Nov 22, 2012
    Messages:
    143
    Once again you guys are great!! Will order some in the morning...

    Many Thanks

    Ron
     
  11. nglitz

    nglitz Active Member

    Joined:
    Oct 6, 2012
    Messages:
    249
    Location:
    Wondeful New Jersey
    notarget, the 20 gauge could be either size. A full size 20ga (and larger gun) will take the #21. A LT20 and smaller 1100 takes a #19.


    Norm
     
  12. notarget

    notarget TS Member

    Joined:
    Jan 29, 1998
    Messages:
    80
    Thanks Norm
     
Thread Status:
Not open for further replies.