Trapshooters Forum banner
Status
Not open for further replies.

Blaser O/U Barrel Hanger

5K views 9 replies 8 participants last post by  Jon Reitz 
#1 ·
My grandson has a Blaser F3 Super Trap Combo. The top barrel of the O/U does not shoot as high as the bottom barrel, in other words not in the same place.

Does anyone know is there are barrel hangers available to change out to make the top barrel shoot in the same place as the bottom barrel.
 
#2 ·
They don't shoot in the same place by design. Bottom barrel shoots higher for the first shot that is up close and the top barrel shoots flatter for the far second shot. It's meant to be that way so I would not suggest messing with it unless you are 100% sure that you know what you are doing and want to change the POI.
 
#8 ·
Their #1 Hangar is the highest shooting hangar for the under Bbl, They will exchange hangars w/you, be sure to ask for the Allen Wrench to fit allen screw
It is a small metric and very hard to find one.

You adjust the rib for top Bbl POI and change hangar for bottom Bbl POI.

Gary Bryant
Dr.longshot
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top