Does anyone have instructions on the disassemble of a Kolar TA. I used to take my Perazzi apart about once a year for a good cleaning and inspection. I bought the Kolar about a year ago and have not had it apart yet. Top lever, locking block, firing pins, etc.

Thanks

Anyone?

Call Kolar they are great peoPle to deal with, Keith J. Sprangers Vice President & Chief Engineer Kolar Arms 1925 Roosevelt Avenue Racine, WI 53406 262-554-0800

I don't know about the lever and such. I take my stock off, firing pins out, trigger assembly out, and sometimes a few other things. Take the provided wrenches to take off the stock and trigger assembly. It's pretty self explanatory. Spray down the trigger assembly and shake it out, then leave it sit to get nice and dry. When you put it back in lightly oil but not too much because your assembly will hang fire if buildup gets in there. Firing pins there is a pin for both of them but be careful they do have springs. It's a pretty simple process, Keith told me how to do all of those things when I picked mine up and like Twinbirds said call Keith if you need anything he is a great guy. Jake

Keith can send you a schematic of the completely disassembled receiver including the smart rods. Easy to take down and put back together.

Good advise to call Keith. I did and he provided all of the information I needed.