| Posted By | Posted Date/Time |
| mike b. | 28-Jun-12 - 12:22 PM ET |
| sterlingworth | 28-Jun-12 - 12:41 PM ET |
| john g. | 28-Jun-12 - 12:49 PM ET |
A friend had his Win. Model 12 action freeze in the fully open position. I was able to get the bolt to move about 1/8 " but no more. Any thoughts? Can anything be removed to check the internals in this open action position?
un-do the screw behind the trigger guard and pull the trigger assembily out.It could be the mag cutoff on the side binding or fell out,ejector broken,any number of things.
Mike
You can start by removing the triger group and see if some thing broke. Its a start. Sometimes the action bar is worn and slips out of the bolt locking the gun up.
If the gun is loose send it to a good smith like Wrigth's.
John G.
Subject:
Model 12 help
From: mike b.
Email:
Date: Thu, Jun 28, 2012 - 12:22 PM ET
Website Address:
Subject:
Model 12 help
From: sterlingworth
Email:
bigray1149@aol.com
Date: Thu, Jun 28, 2012 - 12:41 PM ET
Website Address:
Subject:
Model 12 help
From: john g.
Email:
Date: Thu, Jun 28, 2012 - 12:49 PM ET
Website Address:
The owners, administrators and moderators of the Trapshooters.com have no obligation to keep objectionable messages off this forum. It is impossible for us to review all messages. All messages express the views of the author, and neither the owners, administrators or moderators of Trapshooters.com Discussion Forum will be held responsible for the content of any message. The owners, administrators and moderators of the Trapshooters.com Discussion Forum reserve the right to remove, edit, move or close any thread for any reason at our sole discretion. However, the owners, administrators and moderators are not monitoring or editing the site and are under no obligation to police it for items that some persons may find objectionable.
[ Back ]
To Register for full access to reply and create threads Click Here!
To Login to the discussion web Click Here!
To report problems with this site email email us